WowWee 1045, Руководство пользователя

Страница: 12 / 20

Sleep Mode
/ Driving control
11
Sleep Mode
If you want to send Wrex the Dawg to bed, hold the Start button on his back for a
few seconds and he will enter Sleep Mode. He will also enter Sleep Mode if you do not
give him a command for approximately 8 minutes.
To wake him up, do one of the following:
• Press the Start button again, or;
• Turn him off and then on again using the power switch located on his
underside.
NOTE: To prevent battery depletion you should not leave Wrex the Dawg in
Sleep Mode for long periods of time. When you have finished playing with
him, turn him off using the power switch located on his underside.
Driving control
Wrex the Dawg has two hind wheels and two jointed front legs -- because he is built
from scrap pieces he does not always move in a straight line! He can move forward
and backward in varying styles depending on his mood and even sit or lie down.
To control Wrex the Dawg’s movements, use the direction pad on the remote
controller. For example, press the left direction button, to make Wrex the Dawg spin
to his left.
Remember to point the remote controller directly at him when you give him a
command or he might not receive the command.
As he moves around, Wrex the Dawg can detect obstacles within range. He will make
mood-based comments as he goes!
NOTE:
If Wrex the Dawg’s Edge Detection is turned off, he can still detect obstacles.
To stop Wrex the Dawg, press the Stop button in the center of the Mood dial at the
top of the remote controller. Alternatively you can press his bump button nose.
Forward
Left Right
Backward