Wow SparkMaker SLA, Руководство по эксплуатации

Страница: 16 / 58

28
Rotate the knob clockwise to lower
the platform to the lowest point of
the tank and the platform can no
longer move down and trigger the
photoelectric switch.
＊ Notice：
When the photoelectric switch is triggered
,
the
trigger piece should be inserted into the middle
notch.
Trigger piece
Photoelectric switch
29
Use two fingers on each side
,
press down on the aluminum plate and
attach it to the FEP film , and use the large hex wrench to tighten the four
screws clockwise to fix the aluminum plate.
Large hex wrench
Aluminum plate
＊ Notice：
Please stagger tighten the four screws to
make the aluminum plate and the FEP
film close together
,
so as to prevent the
aluminum plate from lifting up on one
side and causing the leveling to fail.
Large hex wrench
Hand
Leveling the printing platform
Leveling the printing platform