70
Advanced Operation
You can delay transmission of the radio ID for a specific time using the ID-DLY menu
option (page 60). This delay time can be set to one of 30 levels in 100ms increments.
Calling a specific radio using an ID
The KG-S88G also supports the ability to call another radio directly, using its Radio
ID. To enable this function, you must activate and configure all radios in your fleet to
transmit the Radio ID (see Sending a Radio ID on page 69) and select either the
QT, QT+DT or QT*DT DTMF filter option in SP-MUTE (page 58).
To call a specific radio, you must know its radio ID. After pressing PTT and allowing
your radio time to transmit its radio ID, use a PF key (see Transmitting DTMF Tones
on page 71) to send the pre-programmed radio ID that you are calling.
Once a KG-S88G receives a DTMF signal matching its radio ID, it will play a ring
sound and then open the speaker to allow the incoming transmission to be heard. The
length of the ring sound can be set using the RING option in the programming soft-
ware.
Up to 20 Call ID tones can be assigned using the programming software.
