23
Operation
Operation
TO: When a signal is detected, scanning stops. Scan will pause to wait for further activ-
ity and will then resume if no operation is carried out within 5 seconds. Pressing PTT
will transmit on the currently selected channel.
CO: When a signal is detected, scanning stops and resumes immediately after the sig-
nal is lost. Pressing PTT will transmit on the currently selected channel.
SE: When a signal is detected, scanning stops. Pressing PTT will transmit on the chan-
nel where the signal was detected.
The default setting is TO. These scan mode options can only be configured and modi-
fied using the programming software.
VOX
The VOX function allows you to transmit without pressing the PTT key. When active,
VOX will detect that you are speaking into the microphone and then automatically
begin transmitting. VOX is disabled by default. It can be activated and configured using
the programming software.