background image

4

WX160 WX163 

Lithium-ion 

cordless drill/driver

ADDiTiONAL SAFETY 

RULES FOR YOUR 

cORDLESS DRiLL

1.   Remove the battery pack from the drill 

before carrying out adjustments.

2.   Do not expose to rain or water.
3.   Do not store the battery pack in 

temperatures over 40

o

C.

4.   Always charge the battery pack between 

temperatures 0

o

C to 30

o

C. Ideal charging 

temperature is 18

o

C to 24

o

C.

5.   Only use the charger and the battery pack 

provided no others.

6.   Avoid short circuit of the battery pack 

connections (screws & nails).

7.   Do not incinerate or burn the battery 

pack, it may explode.

8.   Do not charge a damaged battery pack.
9.   Replace any damaged supply cords on 

your charger.

10.  Always disconnect the charger power 

supply before making or breaking the 
connections to the battery pack.

11.  Battery pack and charger will be warm 

during charging this is normal.

12. When not in use, remove a charged 

battery pack from the charger.

13. Always remove the battery pack from the 

charger immediately after re-charging is 
completed.

14.  Your drill and battery pack will be warm 

when working, this is normal.

15. Do not dispose of batteries in fire, or 

with household waste. Return exhausted 
batteries to your local collection or 
recycling point.

16. Always check walls, floors and ceilings for 

hidden power cables and pipes.

17.  

Use auxiliary handle(s), if supplied 

with the tool.

 Loss of control can cause 

personal injury.

18. Accessories and metal parts can become 

very hot.

19.  

Hold power tool by insulated 

gripping surfaces, when performing 

an operation where the cutting 

accessory may contact hidden 

wiring.

 Cutting accessory contacting a 

“live” wire may make exposed metal 

parts of the power tool “live” and could 
give the operator an electric shock.

WARNING: If a small amount 

of electrolyte should leak from 

the battery pack under extremes of 

temperature or after heavy use, then 

wash off immediately from your skin 

and hands using clean water. 

For eye 

contact, rinse thoroughly with clean water 
and seek medical treatment immediately.

SAFETY iNSTRUcTiONS 

FOR BATTERY PAcK

a)  Do not dismantle, open or shred secondary 

cells or battery pack.

b)  Do not expose cells or battery pack to heat 

or fire. Avoid storage in direct sunlight.

c)  Do not short-circuit a cell or a battery 

pack. Do not store cells or battery pack 
haphazardly in a box or drawer where they 
may short-circuit each other or be short-
circuited by other metal objects.

d)  Do not remove a cell or battery from its 

original battery pack enclosure required for 
use.

e)  Do not subject cells or battery pack to 

mechanical shock.

f)  In the event of a cell leaking, do not allow 

the liquid to come in contact with the skin 
or eyes. If contact has been made, wash 
the affected area with copious amounts of 
water and seek medical advice.

g)  Do not use any charger other than that 

specifically provided for use with the 
equipment.

h)  Observe the plus (+) and minus (–) marks 

on the cell, battery and equipment and 
ensure correct use.

i)  Do not use any cell or battery pack which is 

not designed for use with the equipment.

j)  Do not mix cells of different manufacture, 

capacity, size or type within a device.

k)  Keep cells and battery pack out of the reach 

of children.

l)  Seek medical advice immediately if a cell 

or a battery pack has been swallowed.

m) Always purchase the correct cell or battery 

for the equipment.

Содержание WXI 60

















Отзывы: