Worx WXI 60, Инструкция по безопасности и эксплуатации

Страница: 12 / 16

12
WX160 WX163
Lithium-ion
cordless drill/driver
6. toRqUe ADjUStMeNt (See fig. f)
(Screw driving force of your drill driver)
The torque is adjusted by rotating the torque
adjustment ring. The torque is greater when the torque
adjustment ring is set on a higher setting. The torque
is less when the torque adjustment ring is set on a
lower setting.
Make the setting as follows:
1 - 4 for driving small screws
5 - 9
for driving screws into soft mate-
rial
10 - 14
for driving screws into soft and
hard material
15 - 19 for driving screws into hard wood
20 - 23 for driving larger screws
for heavy drilling
7. AUtoMAtIc SPINDle lock
(See fig. G)
The automatic spindle lock allows you to use it as
a regular screwdriver. You can give an extra twist
to firmly tighten a screw, loosen a very tight screw
or continue working when the battery energy has
expired. For manual screwdriver purposes, the chuck
is automatically locked when the tool is off.
8. USING tHe SIGHt lIGHt
The sight light allows you to keep a clear view under
less illuminated circumstances. To turn on the light
simply press the on/off switch. When you release the
on/off switch, the light will go out.
9. level DRIllING (See fig. H)
The bubble level is recessed in the motor housing on
the top of the drill. It can be used to keep the drill level
during horizontal drilling operation.
The bubble level is recessed in the motor housing on
the back of the drill. It can be used to keep the drill
level during vertical drilling operation.
10. DRIllING
When drilling into a hard smooth surface, use a center
punch to mark the desired hole location. This will
prevent the drill bit from slipping off center as the hole
is started. Hold the tool firmly and place the tip of the
bit at the point to be drilled. Depress the switch trigger
to start the tool. Move the drill bit into the workpiece,
F C1 A
B C2 G
D H
E