Quick reference
EN
35
Landroid runs outside the boundary
wire.
Landroid does not mow an area within a
boundary wire zone.
Landroid reverses or rotates erratically
near the boundary wire.
The boundary wire of another Landroid
or robotic mower is positioned too
closely.
Ensure at least 1m clearance is provided
in between your boundary wire and that
of your neighbor.
In wet conditions, the boundary wire
electric signal may leak where the wire
has been joined or repaired incorrectly.
Check boundary wire joints. Insulate to
provide a fully waterproof connection.
There is boundary wire electric signal
leakage due to broken insulation.
Repair damaged boundary wire
with the wire connectors supplied.
Landroid
slips out of its working area
going down a hill.
Low grip of Landroid drive wheels.
Please check the wheels are clean and
free of mud in order to have the
maximum grip possible.
Landroid operative system crashes
when charging or on standby.
Software or display fault.
Restart Landroid.
Landroid shuts off when docking in the
charging base.
Landroid fails to charge due to over
temperature protection and is powered
off.
Place the charging base in a shady area
or wait until the temperature has cooled
down.
Poor connection.
Check the LED light on the charging
base.
Check the connection between the
contact pins located on the charging
base and the charging strip.
Landroid stops in the working area.
There is an obstacle in the working area. Remove the obstacle from Landroid’s
working area.
The cutting height is set too low for the
length of the grass or the grass is too
dense.
Raise the cutting height and then
gradually lower.
The extended boundary wire should not
exceed 350m or it may cause signal
problem.
Reduce the lenght of the boundary wire.
The distance between the center of
the lawn and the boundary wire should
not exceed 25m or it may cause signal
attenuation.
Reduce the distance between the
center of the lawn and the boundary
wire perimeter within 25m.
Landroid flips over.
There is an inclined obstacle on the
lawn.
Exclude the obstacle from Landroid’s
working area.
