Worx WP733E, Оригинальная инструкция

Страница: 13 / 196

13
Cordless Lawn Mower EN
8. HANDLE KNOB, LOWER
9. CARRY HANDLE
10. BATTERY PACK COVER
11. GRASS BAG INDICATOR
12. LOWER HANDLE
13. BATTERY PACK* (SEE FIG. E1)
14. SAFETY KEY (SEE FIG. E1)
15. BLADE BOLT (SEE FIG. M1)
16. BLADE (SEE FIG. M1)
*Not all the accessories illustrated or described
are included in standard delivery.
3. TECHNICAL DATA
Type WP733E WP733E.X (7- designation of
machinery, representative of Cordless Lawn
Mower)
WP733E WP733E.X **
Voltage 20V Max.***
No load speed 3500 /min
Deck diameter 32 cm
Cutting diameter 30 cm
Front wheel diameter 140 mm
Rear wheel diameter 160 mm
Cutting height 30 - 70 mm
Cutting height positions 3
Grass collection capacity 30 L
Battery type Lithium-Ion
Machine Weight
(bare tool) 8.6 kg
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
Category Type Capacity
20V Battery
WA3014 4.0 Ah
WA3570 5.0 Ah
20V Charger WA3880 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE DATA
A weighted sound pressure L
pA
= 81.3 dB(A)
K
pA
3.0 dB (A)
A weighted sound power L
wA
= 94.9 dB(A)
K
wA
1.0 dB (A)
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration a
h
< 2.5 m/s²
Uncertainty K = 1.5 m/s²
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING:
To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total