Worx Trans4mer WX540, Инструкция по безопасности и эксплуатации

Страница: 10 / 16

10
WX540
WX540.3 WX540.9
12V Li-Ion
multi-purposed saw
OPERATING INSTRUcTIONS
Note:
Before using the tool, read the
instruction book carefully.
INteNDeD USe
The machine is 2 saws in 1 tool with rep saw and jig
saw function, intended for sawing wood, plastic, metal
and building materials while resting firmly on the
workpiece. It is suitable for straight and curved cuts.
cHARGING PROcEDURE
1. cHARGING yoUR BAtteRy PAck
WARNING!
The charger and battery pack are specifically
designed to work together so do not attempt to use any
other devices. Never insert or allow metallic objects
into your charger or battery pack connections because
an electrical failure and hazard will occur.
2. BefoRe USING yoUR coRDleSS tool
Your battery pack is UNCHARGED and you must charge
once before use. When you charge the new battery
or one which has not been used for long periods of
time, it may not reach full charge until after you have
discharged it fully in use and recharged it several times.
3.1 HoW to cHARGe yoUR BAtteRy PAck
(WX540 WX540.9) (See fig. A1)
Connect the battery charger (13) to the power supply
and the green light (14) will illuminate.
Slide the battery pack (12) into the charger base to
make the connections. And the red light (14) will
illuminate to show charging has started.
After charging approx 3-5hours, the red light will switch
to green, which means the battery is full, and charging
is completed.
3.2 cHARGING PRoceDURe (WX540.3)
(See fig. A2)
1) Plug the charger into an appropriate outlet. The light
(WORX LOGO)(a) will be green.
2) Insert the battery pack into the charger, the WORX
logo will be red to indicate the charging process has
started.
3) On completion of charge, the logo will turn to be
green. The pack is now fully charged, unplug the
charger and remove the battery pack.
0-90
O
8
2
1
15
14
13
15
Position VI
Position I
a
B
C E3
A2 E1 G1
E2 G2
H I
A1 D F