Worx Trans4mer WX540, Инструкция по безопасности и эксплуатации

Страница: 3 / 16

3
WX540
WX540.3 WX540.9
12V Li-Ion
multi-purposed saw
4) PoWeR tool USe AND cARe
a) Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools.
Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool.
Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
f) keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed.
Use of the
power tool for operations different from
those intended could result in a hazardous
situation.
5) BAtteRy tool USe AND cARe
a) Recharge only with the charger
specified by the manufacturer.
A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs.
Use of any
other battery packs may create a risk of
injury and fire.
c) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another.
Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help.
Liquid ejected from the
battery may cause irritation or burns.
6) SeRvIce
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. this will
ensure that the safety of the power
tool is maintained.
ADDITIONAL SAFETY
RULES FOR YOUR TOOL
1.
Always wear a dust mask.
2.
Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden
wiring.
Cutting accessory contacting a
“live” wire may make exposed metal
parts of the power tool “live” and could
give the operator an electric shock.
3.
Use clamps or another practical way
to secure and support the workpiece
to a stable platform.
Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
4.
Always wear safety glasses or
eye shields when using the multi-
purposed saw. everyday eyeglasses
have only impact-resistant lenses;