Worx Sonicrafter WX676, Инструкция по безопасности и эксплуатации

Страница: 12 / 17

11
Oscillating tool WX676 WX676.5 WX676.7
APPLIcATION
WARNING: the sawing teeth are very sharp. Do not touch during mounting
and application.
The workpiece must be clamped tightly before it is cut.
Pic Name Application
Sawing
Universal Metal/Wood End Cut
Blade.
Wood, plastic, fiberglass,
nails, non-ferrous metals, thin
sheet metal, hardened fillers.
Standard Wood End Cut Blade. Wood, plastic, drywall.
Precision Wood Cut Blade. Wood, soft plastics.
HSS Semicircle Saw Blade.
Thin wood, plastic, fiberglass,
non-ferrous metals, thin
sheet metal, hardened fillers,
window glazing.
Sanding
Sanding Pad (Perforated).
Wood, plastic, hardened
fillers.
Sanding Finger Pad. Wood, plastic, hardened fillers
Rasping
Triangular Carbide Grit Rasp
Wood, hardened adhesives,
thin set, masonry
Carbide Rasp (Finger Shaped).
Wood, hardened adhesives,
thin set, masonry
Removing
grout
Carbide Grit Semicircle Saw
Blade.
Grout, porous concrete,
masonry.
Diamond-Coated Semicircle
Saw Blade.
Ceramic and stone tile,
backerboard.
Scraping
Rigid Scraper Blade.
Old paint, hardened
adhesives, caulk, carpet.
Flexible Scraper Blade.
Elastic sealants, paint,
adhesive residues, carpet.
Note:
When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution,
loosen the saw blade, rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
Excessive use and heat build up drastically reduces the life of Sonicrafter
®
(& other branded)
saw blades.