Worx SONICRAFTER WU681, Инструкция по безопасности и эксплуатации

Страница: 11 / 16

11
APPLICATION
Warning: The sawing teeth are very sharp. Do not touch during mounting and application.
The workpiece must be clamped tightly before it is cut.
Pic Description Application
Sawing
Bi-Metal
Metal/Wood End Cut
Blade
Wood, plastic, fiberglass,
nails, non-ferrous metals,
thin sheet metal, hardened
fillers.
Standard Wood End
Cut Blade
Wood, plastic, drywall.
Precision Wood Cut
Blade
Wood, soft plastics.
HSS Semicircle Saw
Blade
Thin wood, plastic,
fiberglass,
non-ferrous metals, thin
sheet metal, hardened fillers,
window glazing.
Sanding
Sanding Pad
(Perforated) Wood, plastic, hardened
fillers.
Sanding Finger Pad
Wood, plastic, hardened
fillers.
Rasping
Triangular Carbide Grit
Rasp Wood, hardened adhesives,
thin set, masonry.
Carbide Rasp (Finger
Shaped) Wood, hardened adhesives,
thin set, masonry.
Removing
grout
Carbide Grit Semicircle
Saw Blade Grout, porous concrete,
masonry.
Diamond-Coated
Semicircle Saw Blade Ceramic and stone tile,
backerboard.
Scraping
Rigid Scraper Blade
Old paint, hardened
adhesives, caulk, carpet.
Flexible Scraper Blade
Elastic sealants, paint,
adhesive residues, carpet.
We recommend that you purchase your accessories listed in the above list from the same store that
sold you the tool. Use good quality accessories marked with a well-known brand name. Refer to the
accessory packaging for further details. Store personnel can assist you and offer advice.
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the
saw blade, rotate it and retighten firmly.