Worx SONICRAFTER WU681, Инструкция по безопасности и эксплуатации

Страница: 10 / 16

10
OPERATING INSTRUCTIONS
Note: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The power tool is intended for sawing and
remodelling wooden materials, plastic, plaster,
non-ferrous metals and fasteners (e.g. nails
and clamps) as well as for working on soft wall
tiles and for dry grinding of small surfaces. It is
especially suitable for working close to edges and
for flush cutting.
ASSEMBLY AND OPERATION
Action Figure
Mounting Accessories See Fig. A-C
Mounting The Sanding
Sheet
See Fig. D
Mounting The Suction
Device
See Fig. E1-E5
Operating The On/Off
Switch
See Fig. F
Using The Variable Speed
Dial
See Fig. G
The Variable Speed Dial can be used to set the
optimum oscillating frequency according to the
accessories used and the respective application.
Oscillation frequency Application
High oscillation frequency
Sanding,
sawing, rasping
and polishing
stone and metal.
Low oscillation frequency
Scraping,
polishing
varnishes.