14
EN
Verification
Before it starts mowing for the first time, make sure Landroid
®
's working area is clear of objects such as
toys and branches...
Set the cutting height to the maximum level (50mm (WR130E
WR131E) / 60mm (WR141E WR144E)).
Place your Landroid
®
a few meters in front of the charging base.
Press
until Landroid
®
turns on. For the first use, input the
default PIN code 0000 by pressing
for four times when the
number 0 is blinking.
NOTE:
When Landroid
®
turns on, all lights on the display will be
illuminated and then turn off. Check if there is any light damaged.
It is recommended to shield the display with your hand when the
outdoor light gets too strong.
NOTE:
Landroid
®
will turn off if it does not receive any input
within 30 seconds after it is turned on. If you enter wrong PIN
code three times, Landroid
®
will raise the alarm “di-di” and then
turn off.
1
2
3
WR130E WR131E
WR141E WR144E
Only for reference
Содержание Landroid WR130E
Страница 1: ...INSTALLATION GUIDE ...
Страница 2: ...Installation guide P03 Original instructions EN ...
Страница 20: ...www worx com ...