Lawn Mowing Robot
EN
13
dull and worn out, they should be replaced with the spare blades
provided with your Landroid
®
L. Spare blades are also available at
your nearest WORX retailer.
A. Rotate and Flip the Blades
Your Landroid
®
L carries the Blades that are all screwed onto the Blade
Disc (16). The Blades allow the Landroid
®
L to do its job and need care
and attention. Every once in awhile, you should simultaneously rotate
and flip all blades for a perfect cut. When rotating and flipping the
Blades, make sure all the Blades are adjusted at the same time or else
it could make the Blade Disc off balance. If your Landroid
®
L mows on
a normal schedule (daily) then the Blades should last one season if
they are rotated and flipped every month. Always check to see if the
Blades are chipped or damaged and replace them if they are.
B. Replace the Blades (See Fig. L)
After some time, usually every season, your Landroid
®
Ls Blades will need to be replaced. Your Landroid
®
L does not like
mowing while using Blades of different age and quality. So when replacing the Blades, make sure to replace all of them
at the same time. You can replace them with one of the three spare Blade kits and extra Blade screws supplied with your
Landroid
®
L.
Before attempting to replace your Landroid
®
Ls Blades, turn the power off and put on protective gloves. Then follow these
steps:
1. Gently flip the Landroid
®
L over
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver
4. Firmly screw on the new Blades
5. Refit the battery and battery cover.
IMPORTANT: After screwing the Blade to the Blade Disc, make sure the Blade is able to spin freely.
7.2 Keep it Clean
WARNING! Before cleaning turn your Landroid
®
L
OFF by pressing the ON/OFF Button to OFF. Put on
protective gloves before cleaning the Blade Disc (16) and
do not use running water. (See Fig. M)
A. Cleaning the Body
Your Landroid
®
L will live a much happier and longer life if it is cleaned
regularly. Although, as your Landroid
®
L is an electric machine,
you will need to take care when cleaning, so DO NOT use a hose,
high pressure washers or otherwise pour running water on your
Landroid
®
L, it is best to use a spray bottle filled with water. When
cleaning the machine body use a soft brush or clean cloth and avoid
using solvents or polishes (See Fig. M). Lastly, make sure that you
remove all build up of grass clippings and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
®
L OFF using the ON/Off Button and wear protective gloves before
touching the Blade Disc (16).
First, flip your Landroid
®
L upside down to expose its underside. Here you will see the Blade Disc the Main Housing (14),
and the Front (18) and Drive Wheels (11). Clean everything thoroughly with a soft brush or moist rag cloth.
Rotate the Blade Disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any
obstructions.
IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the
tiniest crack can decrease your Landroid
®
L mowing output.
C. Clean the contact pins and the charging strips
Clean the Contact Pins (2) located on the Charging Base (3) and the Charging Strip (5) located on the Landroid
®
L using a
cloth. Remove any build up of grass clippings and debris around the contact pins and charge strips periodically to ensure
M
L
