manualshive.com logo in svg

Worthington CS100, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Worthington CS100 Скачать руководство пользователя страница 18

18

CS100 

Control System

Operation

About 

This provides information about the control including the firmware version, the control serial number and 

contact information. This is accessed through the menu system.

Temperature

 

The temperature in the Cryostorage freezer is measured at the location of the thermocouple. The installation 

location is different depending on the model of the freezer but usually the thermocouple is positioned level with 

the top storage box. This may mean that temperatures displayed may be slightly warmer than the temperature 

experienced by the samples or product stored in the freezer.

Validation

Some organizations require that equipment be validated periodically. If information is needed on the proper 

techniques to validate this equipment, please contact your supplier.

Menu System

MENU

1. Thermocouple Enable...........................  On/Off 
2. Set Date/Time.....................................  Hr – Min – Mon – Day - Yr 
3. Low Supply Alarm................................  30-120 
4. High Temp Alarm.................................  0° to -196° 
5. Temp Alarm Delay................................  0-60 
6. Audible Alarm Retrigger........................  0 to 720 
7. Remote Alarm Delay.............................  0 to 720 
8. Display Brightness................................  1 to 15 
9. About.................................................  K SERIES V1.1 Firmware

      SER 

12345 

Serial 

Number 

Factory Defaults

• Thermocouple....................................... On 
• Date/Time............................................  Factory Set for Eastern Standard Time 
• Low Supply Alarm.................................  30 minutes 
• High Temp Alarm..................................  -100° C 
• Temp Alarm Delay.................................  0 minutes 
• Audible Retrigger..................................  10 minutes 
• Remote Alarm Delay..............................  30 minutes 
• Display Brightness.................................  7 

Содержание CS100





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды