manualshive.com logo in svg

Worthington CS100, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Worthington CS100 Скачать руководство пользователя страница 10

10

CS100 

Control System

Operation

Operating Environment  

The CS100 is designed to be operated at normal room temperatures (60°F to 80°F, 15°C to 27°C) and a 

relative humidity level below 50%. The humidity level should be maintained such that the electronics are not 

exposed to condensation. 
The K SERIES Cryostorage system should be positioned such that all sides of the unit are easily accessible and 

the user can easily connect/disconnect the power cord from the wall socket. 

CS100 Components 

The CS100 for the K SERIES Cryostorage system consists of the following components:

• Main Control and Display
• Harness Assembly 
• Power Supply 
• Thermocouple Assembly 
• Sensor Assembly 
• Cryogenic Solenoid Valve 
• Remote Alarm Plug

The CS100 is assembled onto the freezer at the factory and completely tested. Start operation of the control 

system by plugging the power cord into the wall outlet. The CS100 will go through a short startup routine 

and then start operation. For information relating to assembly of the control components and connection 

information, refer to Appendix A. 

General Equipment Description  

Main Control Front Panel

Содержание CS100





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды