Worth Data 520-RF, Руководство пользователя

Страница: 10 / 73

10
1D Setup Mode
Note: If you are using the 2D 520-RF then refer to the 2D setup chart starting on page 21.
On the included CD-ROM you will find the RF Laser Setup Menu sheet. This simple
menu lets you easily configure the RF Laser Reader to work with almost any computer
system, and to tailor its bar code reading and data format characteristics.
Be sure to read the scanning instructions on the next page. To read
Setup Menu bar codes
and configure your reader, you must know the right way to scan bar codes.
These are the RF Laser Reader's default settings and are shipped configured to these
settings; they can be reset to them at any time by scanning the
Start Setup and Reset codes
on the RF Laser Setup Menu .
Code 39 UPC\EAN
• Enabled • Enabled
• Check digit disabled
• UPC supplements disabled
• Accumulate Mode enabled • UPC-E Compressed / NSC of 0
• Caps Lock Off
• UPC-A NSC and EAN-13 1st 2
characters
• Start/stop characters not
transmitted
and check digits transmitted
2 of 5 Code
• UPC-E NSC and EAN-8 1st 2
characters
• Disabled
& check digits not transmitted
•
I 2 of 5 Code Disabled General configuration settings
• 6-digit code length
• Check digit disabled
Code 128
• CR for Terminator Character
• Enabled
• Data Transmission Timing of
None
• UCC/EAN-128 options
disabled
Codabar
• No preamble or postamble
• Disabled
• CLSI Format disabled
• Start/stop characters not
transmitted
MSI/Plessey
• Disabled
• Check digit(s) not transmitted
Code 93
• Disabled
• Full ASCII disabled
If you need to change any of the default settings, or would like to learn more about the Wireless scanner
options, the next several pages will explain, step by step, how to set them.