Safety Information
TX03679,00016D5 -19-25APR08-1/1
TX03679,0001745 -19-03JAN07-1/1
Make Welding Repairs Safely
IMPORTANT: Disable electrical power before
welding. Turn off main battery switch
or disconnect positive battery cable.
Separate harness connectors to engine and
vehicle microprocessors.
Avoid welding or heating near pressurized fluid lines.
Flammable spray may result and cause severe burns if
pressurized lines fail as a result of heating. Do not let heat
go beyond work area to nearby pressurized lines.
Remove paint properly. Do not inhale paint dust or fumes.
Use a qualified welding technician for structural repairs.
T133547
—UN—15APR13
Make sure there is good ventilation. Wear eye protection
and protective equipment when welding.
Drive Metal Pins Safely
Always wear protective goggles or safety glasses and
other protective equipment before striking hardened
parts. Hammering hardened metal parts such as pins and
bucket teeth may dislodge chips at high velocity.
Use a soft hammer or a brass bar between hammer and
object to prevent chipping.
T133738
—UN—15APR13
TM10693 (27JUN19)
00-0001-14
624KR Loader
062719
PN=22
