Safety Information
TX03679,00017C8 -19-02MAR07-1/1
TX03679,000179F -19-07SEP06-1/1
TX03679,00016F0 -19-24JAN07-1/1
Operating or Traveling On Public Roads
Machines that work near vehicle traffic or travel slower
than normal highway speeds must have proper lighting
and markings to assure they are visible to other drivers.
Install additional lights, beacons, slow moving vehicle
(SMV) emblems, or other devices and use as required to
make the machine visible and identify it as a work machine.
Check state and local regulations to assure compliance.
Keep these devices clean and in working condition.
T141891
—UN—15APR13
Inspect and Maintain ROPS
A damaged roll-over protective structure (ROPS) should
be replaced, not reused.
The protection offered by ROPS will be impaired if ROPS
is subjected to structural damage, is involved in an
overturn incident, or is in any way altered by welding,
bending, drilling, or cutting.
If ROPS was loosened or removed for any reason, inspect
it carefully before operating the machine again.
To maintain the ROPS:
•
Replace missing hardware using correct grade
hardware.
•
Check hardware torque.
•
Check isolation mounts for damage, looseness or wear;
replace them if necessary.
•
Check ROPS for cracks or physical damage.
Add and Operate Attachments Safely
Always verify compatibility of attachments by contacting
your authorized dealer. Adding unapproved attachments
may affect machine stability or reliability, and may create
a hazard for others near the machine.
Ensure that a qualified person is involved in attachment
installation. Add guards to machine if operator protection
is required or recommended. Verify that all connections
are secure and attachment responds properly to controls.
Carefully read attachment manual and follow all
instructions and warnings. In an area free of bystanders
and obstructions, carefully operate attachment to learn its
characteristics and range of motion.
TM10693 (27JUN19)
00-0001-11
624KR Loader
062719
PN=19
