■ Welding Mode
Crater Off
Press and hold the torch switch, the machine will open the gas valve to start the flow of the
shielding gas during the pre-flow time and then the arc is started at welding current. When
finish to weld, release the torch switch, then the arc is off and flow the gas during the gas
after-flow time.
Crater On
Press and hold the torch switch, the machine will open the gas valve to start the flow of the
shielding gas during the pre-flow time and the arc is started at the crater current. At this time
release the torch switch, the output current will be increased from the crater current to the
welding current during the up slope time. When finish to weld, press and hold the torch switch,
the output current will be decreased from the welding current to the crater current during the
down slope time. At this time release the torch switch, the arc is off and flow the gas during the
after-flow time.
Crater Repeat
Press and hold the torch switch, the machine will open the gas valve to start the flow of the
shielding gas during the pre-flow time and the arc is started at the crater current. At this time
release the torch switch, the output current will be increased from the crater current to the
welding current during the up slope time. At this time Press and hold the torch switch, the
output current will be decreased to crater current and then release the torch switch, the output
current will be increased to welding current. When finish to weld, press and hold the torch
switch, the output current will be decreased from the welding current to the crater current during
the down slope time. At this time just release the torch from the metal to be welded and then
the arc is off and flow the gas during the after-flow time.
①
Welding current
②
Start current
③
Crater current
④
Up slope time
⑤
Down slope time
⑥
Gas pre-flow time
⑦
Gas after-flow time
⑧
Pulse current
