WorldTracker WTGAT Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 76

background image

-

36

-

36

6. Messages send by WTGAT:

Message from the WTGAT can be send using SMS or GPRS. In SMS only mode all data is sent using SMS.
In SMS and GPRS mode all messages are sent using GPRS. If SMS and GPRS mode is enabled and GPRS
is not available then any input activations will be sent using SMS. Whenever GPRS is available again the
unit will use GPRS again. In case real time tracking is enabled in SMS and GPRS mode and GPRS is not
available then the unit can send the data using SMS if enabled (see configuration menu).

If GSM signal is not available and input is activated then the tracking unit will send the alarm message as
soon as there is GSM signal again. The time and date in the message is from the GPS time and date at the
time the message is sent.

If real time tracking is enabled and there is no GSM signal then the information will be lost. The tracking unit
will still save GPS locations using the ‘GPS reading/saving interval setting’ if the GPS location is valid.

1. Location Message.
2. Confirm Message for Update.
3. Missed messages for real time tracking.

1.Location Message:

The data length is always the same!

Sample:

05*850,000,PT35,A,2459.3640,N,12125.2958,E,000.0,224.8,00.8,07:47:26 09-09-
05,1.00,80,3F

,353425142654345

ID Code (6 Bytes in ASCII), Status code (3 Bytes in ASCII), Unit number, Status (A or V), Latitude, N/S
indicator, Longitude, E/W Indicator, speed, Course, HDOP, GPS time lat/lon value - GPS date lat/lon value,
Unit Version number, battery power level, ADC voltage level, <IMEI number if option enabled>

ID CODE:

The ID code can be 05*850 or 05*827.

05*850

is returned when the unit has received a request message from base to send a

location message.

05*827

is returned if any input is activated.

STATUS CODE:

Sent in ASCII code for text message. Add $30 to First, Second and Third Code.
;

First code:

; 1 = Battery power low <20%
; 2 = Motion alert alarm
; 4 = Park alert alarm
; 8 = Entering Sleep mode message
; 16 = Temperature from Digital Thermometer (DS18S20) above or below the configured value

; Second Code:

; 1 = Panic Button Activated
; 2 = Motion detection alarm enabled
; 4 = Park detection alarm enabled
; 8 = 24 Hour no motion alarm activated

;

Third Code:

; 1 = Vehicle traveled above MAX configured speed limit
; 2 = AUX1 input activated
; 4 = ADC activated
; 8 = 0 -> Positive temperature reading
; 1 -> Negative temperature reading

«
...
34
35
36
37
38
...
»

Содержание WTGAT













































































Отзывы:

Нет отзывов

Похожие инструкции для WTGAT

Бренд: RC Electronics Страницы: 67

Бренд: Garmin Страницы: 30

Chart Master 169CSI

Бренд: Interphase Страницы: 89

Бренд: Navionics Страницы: 38

Бренд: Rope Страницы: 12

Бренд: Gator Страницы: 22

Бренд: Magellan Страницы: 82

Бренд: Eddy Wireless Страницы: 21

TwoNav Sportiva

Бренд: CompeGPS Страницы: 2

Бренд: TomTom Страницы: 5

Hands-Free Car Kit

Бренд: TomTom Страницы: 14

Бренд: TomTom Страницы: 30

Бренд: TomTom Страницы: 36

Бренд: IOTERA Страницы: 7

GlobalMap 7000C

Бренд: Lowrance Страницы: 128

Бренд: NorthStar Страницы: 404

Mini-MT GSM2228

Бренд: Enfora Страницы: 45

Бренд: Ercogener Страницы: 86

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды