WorldTracker WTGAT, Руководство пользователя

Страница: 32 / 76

- 32 -
32
Example: 05*827,A2,1,0 (Disconnect from GPRS in sleep mode)
A confirm message will be returned.
A3,x -> ( x=0 Do not stop real time tracking when roaming)
( x=1 Stop real time tracking when roaming )
Example: 05*827,A3,1,0 (Stop real time tracking when roaming)
When enabled will stop sending real time data when SIM card is roaming. All other messages are still sent.
A confirm message will be returned.
All return messages are send-using Base1, 2 or 3 depending on the command received and your
configuration settings.
The message received does not have to start with ‘05*827’.
Example:
Message sent: justtesting@rovertest.com 05*827,0123456789,11,0
Will be accepted and processed.
WARNING:
Default security code is ‘0123456789’ and the option is automatic disabled after operating system upload.
We strongly recommend for your network to keep secure to change the ‘Security ID code’ first and do not
leave it set to ‘0123456789’.
Base phone number 2 can receive the following End user text messages:
- Park Alert Activated
- Stop MOTION Alert Activated
- PANIC Button Activated
- Low Battery Voltage
- OVERSPEED Alert No Movement 24 Hours Alert
The configuration menu allows to choose different language for custom message to Base phone
number 2. Default language is English.
Unit activation and sleep Mode:
The tracking unit has a build in ‘motion’ sensor that detects any movement and g-force change.
The WTGAT will enter ‘sleep’ mode after 5 minutes if no ‘motion’ is detected. In sleep mode the GPS
module is powered down, but the unit will still process any incoming and outgoing SMS messages if ‘Normal’
running mode is selected.
When the unit is in ‘Normal’ and ‘Basic sleep mode’ it will take several seconds to ‘wake up’ to normal
running mode after motion is detected. Motion is normally detected when you move the unit.
A valid GPS location can take several seconds to several minutes (depending if the WTGAT had valid GPS
location before and the time when there was last valid GPS location) after the unit is operating in normal
running mode (GPS aerial has clear sky view).
Software and hardware lock-ups:
The unit has an internal hardware timer that detects ‘lock-up’.
If the unit is ‘locked’ in it automatic ‘reset’ after 5-10 minutes.