WorldTracker WTGAT, Руководство пользователя

Страница: 20 / 76

- 20 -
20
using GPRS (for real time tracking only).
Disconnect GPRS when in sleep
mode When the unit enters sleep mode it will disconnect from
GPRS
Stop real time tracking when
roaming When the unit enters a roaming area it stop sending Real
time tracking locations (they are saved to memory –
‘
Resend Missed locations is enabled’ ). When the unit
returns to non- roaming area the real time tracking will
restart (missed messages will be send back).
Resend Missed locations When enabled any activation or ‘Real time tracking’
messages will be automatic resend.
Send Location for Missed Phone
Call The current or last know location can also be requested
from the WTGAT after missed Phone call (the call is not
picked up by the WTGAT). If the WTGAT picks up the call
no location message is returned. Only for missed calls
(#)
Existing password To connect to unit via com port
New password To change the password
Check configuration is valid Check if the setting is valid (This check can only check
basic setup errors)
Select directory Select the directory of setting saved file
Select file Select the setting saved file to load
Load configuration Load the setting from computer file
Save configuration Save the settings into computer file
File selected The selected file will show in this window
Return to main menu Return to main menu
(1) If activated the unit will try to send SMS or GPRS message (depending on settings)
back to base with the current speed and location. The speed displayed in the
message may not be the activation speed, but whenever the option is activated the
speed was more then the speed limit configured for the set time.
(2) Base Phone number 2 must be configured.
(3) There are 3 dial-out numbers that can be configured when the Panic button is
activated. The WTGAT will start dialing from the first number. If no connection can
be made within 30 second the next number will be dialed. The WTGAT will continue
to try all three numbers (if configured) for up to 3 times. If any
number connects then no more other numbers will be dialed.
(4) Make sure that the pin code is correct configured for your sim card. If the pin code is
incorrect the sim card may get ‘blocked’.
(5) The Panic status LED (BLUE LED) will be ON once the WTGAT detects that you have
pressed the Panic input button. To activate the Panic input the user must press the
panic input until the Blue LED is ON.
(6) If MOTION alert is enabled you must move (vibration) the WTGAT at least one time
every 1 minute. If no movement or vibration is detected the internal buzzer will beep
for 30 seconds. You must then move the WTGAT within the 30 seconds.
If not the WTGAT will send ‘Motion alert activated’ and or location message. Once
Motion alert has been activated it will automatically deactivate.
(#) You must configure the ‘Auto Pickup after (0-9) rings’ for a value 3 or more. As
soon as you hear the first ring tone you must hang up. If not no message will be
returned.
(May not work with all GSM providers or SIM cards)
Important (*):
Base Phone number 1 must be different then Base Phone number 2 and Base
Phone number 3. So all Base phone numbers must be different from each other.