Worldlawn WYZ 48, Руководство оператора

Страница: 14 / 44

10
2.2.2 RPM: Full Speed:3600RPM(No Load) Idle:1500RPM
2.3 FUEL SYSTEM
2.3.1 Capacity: 10.5 gal(40L)
2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher.
2.3.3. Fuel Shut-Off Valve: left tank, & right tank
2.4 ELECTRICAL SYSTEM
2.4.1 Charging System: Flywheel Alternator
2.4.2 Charging Capacity: 15 amps
2.4.3 Battery Type:12V/33AH
2.4.4 Polarity: Negative Ground
2.4.6 Fuses: Two 20 amp blade type
2.4.7 Safety Interlock System:
◆ PTO must disengaged, brake engaged, and motion control levers out (neutral lock) to start engine.
(It is necessary for the operator to be in the seat to start the engine.)
◆ Operator must be in the seat when PTO is engaged, brake is disengaged, or motion control levers
are moved in ,or engine will stop.
◆ Engine will stop if the left, the right, or both levers are moved from neutral lock position while
brake is engaged.
2.5 OPERATOR CONTROLS
2.5.1 Steering and Motion Control:
. Separate levers, on each side of the console, control speed and direction of travel of the respective drive
wheels.
. Steering is controlled by varying the position of the levers relative to each other.
.Moving motion control levers outward (in slots) lock the drive system in neutral.
2.5.2 PTO Switch: Engine electric clutch ( to drive belt)which engages mower blades.
2.5.3 Parking Brake Lever: Engages parking brakes.
2.5.4 Deck Height Adjustment Lever: Sets cutting height to desired position.
Foot pedal that assists in raising the deck.
2.6 SEAT
2.6.1 Type: Standard seat: high back, foam padded(internal spring suspension) with arm rests.
2.6.2 Armrests: Standard seat: foam padded flip-up armrests with height adjustment.
2.6.3 Seat Safety Switch: Incorporated into the Safety Interlock System..
Time delay seat switch eliminates rough ground cut-outs.
2.7 HYDROSTATIC GROUND DRIVE SYSTEM