5
Before Operating
10. To stop forward motion, squeeze both
Drive Levers until the mower stops. Lock
the levers using the thumb latches.
Move the Speed Control Lever to the
stop position.
IMPORTANT!: To move the unit with
the
engine stopped, the dump valve
on each
pump must be cracked open.
This is the
5/8" Hex
with a hole through it
located on
the
top, front, right side of each pump.
Turn the valve counter clockwise to
WARNING:
FAILURE TO FOLLOW THE PREVIOUS INSTRUCTIONS MAY RESULT IN SEVERE
BODILY INJURY OR MECHANICAL FAILURE.
PLEASE BE CAREFUL !
open. The hydrostatic pumps will not
operate properly with these valves
open.
The mower is equipped with “Operator
Presence Controls” on the upper handle.
When the operator leaves the operator
zone, removing (both) hands from the
Operator Presence Control Levers will
cause the engine to kill.
THIS FEATURE
IS FOR YOUR SAFETY!
SAFETY DECALS
In order to promote safe operation, Worldlawn Power Equipment. supplies safety decals on all
products manufactured. Because damage can occur to safety decals through shipment, use
or reconditioning, Worldlawn will, upon request, provide safety decals for any of our products in
the field at No Charge. Contact your authorized Worldlawn dealer for more information.
363038
363023
363001
Содержание WY36FS481VH
Страница 1: ...OPERATORS MANUAL WY36FS481VH WY48FS481VH ...
Страница 10: ...Notes ...