Worldlawn WY36FS481VH, Руководство оператора

Страница: 3 / 12

2
Assembly Instructions
Fig. 1
1. Remove inner parts box and handle from
crate. Remove outside frame work so
that the mower is setting on the pallet.
2. On a 36" mower, use 3 – 5/16" X 1 3/4"
bolts and 3 – 5/16" whizlocks and bolt the
bumper into place. (On the 48" there are
4 - bumper bolts required.) The
whizlocks should go to the inside of the
deck. When assembling a 48" mower,
make sure that the bumper is flush with
the deck on both ends of the bumper.
3. Using 6 – 3/8" X 1" bolts (3 – used for
each caster) and 6 – 3/8" whizlock nuts,
bolt the casters into place. Position
whizlock nuts to the inside of the deck.
4. Using 2 – 1/4" X 3/4" bolts and 2 – 1/4"
nyloc nuts secure the speed control lever
assembly to the underside of the mount
plate on the lower handle. Connect the
speed control link to the control cam arm
and secure with 1 - 1/4" nyloc nut.
5. Mount the gas tank using the 2 – nylon
hold down straps, pulling tension on the
buckles until secure. Attach fuel line on
tank to fuel filter on engine. Attach vapor
recovery line on engine to vent barb on
6. Using the remaining 3/8" X 1" bolts and
the 4 – 3/8" nyloc nuts, bolt the upper
handle into position. (Remember that
there are 3 – height settings for the
SPECIFICATIONS
Belt Tension Guide
Belt
Engine to Deck
Right Blade Drive
Engine to Pump
Inch Deflection
1/2”
1/2”
(48”,52”, And 60” only)
1/2”
How to Adjust
Turnbuckle at Idler
Threaded Rod
Fixed idler with Slot
Hydraulic System
Capacity
Filter
Oil
3 quarts
( to the top of the tank baffle )
A High quality 15 W50 synthetic engine oil
fill neck. Secure all connections with
hose clamps.
Worldlawn P/N 423361