HANGZHOU BLUE WHALE MUSIC TECHNOLOGY CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
- 10 -
5.7.3 / OCTAVE-
Press the MENU button repeatedly until the OLED dispays “Octave” to start the function of Octave. This function allows the keyboard to
change the Pitch up/down by octave. When this function is valid, the OLED displays the “Octave” and the value of current transposition. It
can be adjusted by value dial. The initial value is 0, adjusting scale is -4
～
4. The operation steps is shown as below and the OLED displays
the following:
(1) Press the MENU button repeatedly until the OLED dispays “Octave”.
(2) Rotate the value dial to adjust the keyboard octave, the OLED will display the current octave. Holding the “Enter” button for 2 seconds to
exit the edit mode and return to parameter display mode.Then if you rotate the knobs, move the sliders or trigger the pads the OLED will
display the current parameters of these controllers.
5.7.4 Transpose
Press the MENU button repeatedly until the OLED dispays “Transpose” to start the function of Transpose. This function allows the keyboard
to change the Pitch up/down by semi-tone. When this function is valid, the OLED displays the “Transpose” and the value of current
transpose. It can be adjusted by value dial. The initial value is 0, adjusting scale is -12
～
12. The operation steps is shown as below and the
OLED displays the following:
(1) Press the MENU button repeatedly until the OLED dispays “Transpose”.
(2) Rotate the value dial to adjust the keyboard transpose, the OLED will display the current transpose. Holding the “Enter” button for 2
seconds to exit the edit mode and return to parameter display mode.Then if you rotate the knobs, move the sliders or trigger the pads the
OLED will display the current parameters of these controllers.
5.7.5 Program change
Press the MENU button repeatedly until the OLED dispays “Program change” to start the function of Program change. Program change is
for adjusting the voice of current channel. When this function is valid, the OLED displays the “Program change” and the current voice
number. It can be adjusted by value dial and confirmed by Enter button. The initial value is 1, adjusting scale is 1
～
128. The operation steps
is shown as below and the OLED displays the following:
(1) Press the MENU button repeatedly until the OLED dispays “Program change”.
(2) Rotate the value dial to adjust the keyboard program, the OLED will display the current keyboard program.
(3) Press the “Enter” button to confirm and the OLED will display “Done”. Holding the “Enter” button for 2 seconds to exit the edit mode and
return to parameter display mode.Then if you rotate the knobs, move the sliders or trigger the pads the OLED will display the current
parameters of these controllers.
