WORLD TECH ELITE 33027, Инструкции по эксплуатации

Страница: 13 / 24

10
9.0 CALIBRATING THE DRONE
10.0 POST FLIGHT
If the drone drifts while hovering or is not stable in Beginner Mode you need to recalibrate.
1. Put the drone on a flat level surface and power on.
2. Turn on the transmitter, push and hold the left stick to the top right corner and the right stick
to the top left corner at the same time. Keep the drone disarmed.
3. The drone will beep, then beep three more times. When the beeps stop, the drone has
been calibrated successfully.
Attention:
Make sure the drone is on a flat level surface and that the motors are disarmed during
the calibration process.
1. Land the drone and disarm the motors.
2. Power off the drone by unplugging the battery, then turn off the transmitter.
3. Remove the battery pack from the drone. Store drone and battery separately in a cool dry
place. Store away from kids and away from high temperatures.
Attention:
Always perform the post flight procedure above when you are done flying the drone.
Failure to do so may result in personal injury and/or product damage.