World Cat 250SF, Информация для клиентов

Страница: 40 / 53

World Class Catamarans
5-6
RAW WATER SYSTEM
The raw water pump is located in the aft rigging compartment on the port side, and can be
accessed through the hatch located on the vertical wall beneath the livewell. The pump and wir-
ing are mounted on the rigging wall at the back of the compartment. The raw water pump is
connected to the dual purpose livewell pump which brings in water through a strainer located
on the inboard side of the port sponson. The livewell/raw water seacock must be open for the
system to work, however, the livewell pump does not have to be “ON”. Similar to the freshwater
pump, the raw water system in controlled by a pressure switch set at 50 psi. The pump will
cycle on and off as needed to maintain this pressure. Most owners leave the pump “on” through-
out the day, and use the system when necessary. On the 270 ECS, the raw water pump feeds
the raw water outlet on the port cockpit wall. This operates similar to a residential water spigot,
simply connect the hose and open the valve to use. To view the layout of the raw water system
see the drawing on page 17.
MARINE HEAD
The 270 ECS can be equipped with a Galley Maid™ marine head in the cabin. The control
panel for the head, shown on page 7, is mounted on the vertical wall forward of the head. Power
is supplied to this panel through a 30 amp fuse located in the console on the accessory fuse
block.
Water is supplied to the system from the freshwater tank located in the port sponson. To
operate the head, the freshwater or raw water, system must be pressurized. A switch on the
marine head control panel will activate a solenoid which allows water to fill the bowl.
The holding tank is mounted in the port sponson forward of the forward of the fuel tank. The
deck pumpout fitting is located along the gunwale, outboard of the port deckwing.
! WARNING
If the solenoid fails or becomes locked in the open position, shut off the supply system,
(fresh or raw water pump), quickly and evacuate the bowl. For heads connected to the
raw water system, close the seacock located in the port aft bilge compartment.