World Cat 230CC, Руководство пользователя

Страница: 31 / 62

20 20 World Cat Glacier Bay Edition 2740 Owner’s Manual
30
6.6.2 Anchor Windlass
Use to deploy and retrieve the anchor. This accessory is controlled by a dedicated switch at the helm and can
also be controlled at the bow with up & down foot switches. The fuse is located at the battery management
panel. A 50 Amp breaker is installed at the factory for the anchor windlass. For Windlass Deck Switch
Maintenance refer to pages 43 - 44 for details provided by Lewmar.
6.7 Battery Selection
World Cat supplies the original batteries onboard your vessel. We use both Group 27 and Group 31
batteries. In the event of a failure, replacements must be of equal size and specifications (see below):
6.8 Battery Care
Batteries should be secured in a non-metallic tray and insulated boots should cover the terminals. Depending
on the style of battery you choose, inspect the electrolyte and perform routine maintenance as suggested
by the manufacturer. Remove corrosion from the terminals quickly to prevent failure. Use a stiff brush and a
solution of water and baking soda to remove corrosion, then grease the terminals to prevent further build-
up. Be careful to clean up thoroughly to avoid contaminating the electrolyte.
When servicing the batteries, follow the safety procedures shown below and work to avoid electrolyte spills
which can harm you and your vessel.
GROUP 27 (27M -XHD )
CCA: 8 00
MCA: 10 00
RESERVE CAPACITY: 182 Min @ 2 5 A
GROUP 31 ( SRM-31 )
CCA: 675
MCA: 8 45
RESERVE CAPACITY: 210 Min @ 25A
!!! DANGER
All batteries contain an electrolyte, commonly sulfuric acid, which is a caustic and volatile chemical.
Use extreme caution when charging or servicing.