Workzone WZTS 1700 Скачать руководство пользователя

Страница: 9 / 48

1300 922 271

[email protected]

AFTER SALES SUPPORT

WZTS 1700

09/2012

•

If necessary, wear suitable personal protection equipment.

This could consist of:

- Ear-muffs to reduce the risk of damaging your hearing

- A breathing mask to reduce the risk of inhaling hazardous dust

- Always wear gloves when handling saw blades and rough materials.
Carry saw blades in a container to avoid injuries.

•

The following can have an influence on dust development:

- Worn, damaged or cracked saw blades

- Recommended capacity of the vacuum extraction system: 20 m/s

- Proper guidance of the workpiece

•

Blades made of high-alloy high-speed steel (HSS) must not be used.

•

Keep the push stick or handle for a push block at the machine at all
times, even when you are not using them.

1.2.2. Maintenance and service

•

The following conditions can have an influence on noise impact on
the operator:

- Type of saw blade (e.g. saw blades designed to reduce noise deve-
lopment)

- Material of the workpiece

- The force with which the workpiece is pushed against the saw blade

•

Faults on the machine or its guards, safety devices and blade must be
reported to the person in charge as soon as they are discovered.

1.2.3. Safe operation

•

Use a push stick or the handle with a push block to feed the workpie-
ce safely past the saw blade.

•

Use the splitter and set it correctly.

•

Use the upper blade guard and set it to the correct position.

•

Do not cut rebates or grooves without fitting a suitable guard, e.g. a
tunnel-type guard, over the saw table.

•

Circular saws must not be used for slotting jobs (cutting grooves
which end in the workpiece).

•

Use only blades where the permissible maximum speed is not lower
than the maximum spindle speed of the bench-type circular saw and
which are suitable for the material to be cut.

WZTS_1700_AUS_SPK7.indb 9

21.05.12 15:54

Содержание WZTS 1700

















































Результаты поиска

Содержание WZTS 1700

Отзывы:

Похожие инструкции для WZTS 1700

Бренды по названию

Популярные бренды

Workzone WZTS 1700, Руководство пользователя

Результаты поиска

Содержание WZTS 1700

Отзывы:

Похожие инструкции для WZTS 1700

Бренды по названию

Популярные бренды