Workzone GPAC2200, Руководство пользователя, Страница: 11 / 36

Safety
11
15. Check the compressor for any damages.
• Before you use the compressor, the protective devices or easily damaged
parts must be carefully checked for functioning properly and as intended.
• Check to make sure that moving parts are fully functional, that they are not
jammed and that the parts are not damaged. All parts must be properly
mounted and fulfil conditions to ensure proper operation of the compressor.
• Damaged protective devices and parts must be properly repaired or re-
placed by an authorised workshop to the extent not otherwise specified
in the user manual.
• Damaged switches must be replaced by a customer service workshop.
• Do not use any compressors if the On/Off switch cannot be turned on and off.
16. ATTENTION!
• For your own safety, only use accessories and auxiliary equipment specified
in the user manual or recommended or specified by the manufacturer. Us-
ing fitted tools or accessories other than those specified in the user manual
or recommended in the catalogue may pose a risk of injury for you.
17. Have your compressor repaired by an electrical technician.
• This compressor complies with applicable safety regulations. Repairs
may only be performed by an electrician who uses original replacement
parts; otherwise, there is a risk of accident for the operator.
18. Protection against noise emissions.
• Wear ear protection when using the compressor.
19. Replacing the mains connection line.
• If the mains connection line is damaged, it must be replaced by the man-
ufacturer or an electrician to avoid risks.
Safety instructions for spray painting
• Do not work with paints or solvents whose flash point is less than 55 °C.
• Do not heat up paints and solvents.
• When working with liquids that are harmful to health, you must use filter
units (face masks). Also be sure to observe all information regarding
protective measures made by the manufacturers of such substances.
• Observe the information and labels in accordance with the Ordinance on
Hazardous Substances provided on the outer packaging of the materials
you are working with. If applicable, you must also take additional protective
measures. This includes in particular wearing suitable clothing and masks.