E83
E84
E85
E86
Master
E87
Slave 1
E88
Slave 2
E89
Slave 3
E100
E101
E102
E103
E104
E105
E106
E107
-
-
*Not applicable if the lower position is limited.
Step 1: Put the desk at the lowest position.
Step 2: After the desk is in its lowest position,
release the control and then hold it down again
until the desk makes a small movement down
and up.
Initialization (Reset):
Error codes
Initialization
Initialization
Initialization
Initialization
Initialization
Initialization
Initialization
Initialization
Massage
Massager has been disconnected OR has failed
Mounting/Initializing Device
DC output
DC device has been disconnected OR has failed
Mounting/Initializing Device
Radio turned off
Radio circuit is turned off and needs to be restarted
Mounting/Initializing Device
Lost connection to the master OR next message is from the master
control motor cable/initialization/
Lost connection with slave 1 OR next message is from slave 1
control motor cable/initialization/
Lost connection with slave 2 OR next message is from slave 2
control motor cable/initialization/
Lost connection with slave 3 OR next message is from slave 3
control motor cable/initialization/
Forced initialization
reference 1
Forced initialization initiated
Forced initialization
reference 2
Forced initialization
reference 3
Forced initialization
reference 4
Forced initialization
reference 5
Forced initialization
reference 6
Forced initialization
reference 7
Forced initialization
reference 8
