22. TROUBLESHOOTING
22
Troubleshoo ng
22.1 Turning ON
When the power cable is plugged in, the LED should begin flashing. If nothing happens, please check you power
supply. A stable power supply is essen al for correct func oning of the device. The device should boot and
produce picture through the HDMI within seconds of powering up.
22.2 Reset bu on
On side of the MEDICAS device, a reset bu on is present. This bu on has two func ons.
If the reset bu on is held down during device startup, the device should go directly into the Safe Mode as
described in the next sec on.
Holding the reset bu on for 15 seconds while the camera is already running (but even if no image is pro-
duced) should reset the device to factory default state.
To actuate the reset bu on, use a fine pointed object such as a toothpick or an unfolded paperclip.
Figure 22.1 – Reset bu on.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.2.0 EN, 28
th
May, 2020
All pictures are only for illustra on.
Real values may vary.
59
