Workshop WS0500VA0, Руководство пользователя

Страница: 8 / 48

8
To reduce the risk of electric shock, this Vac
has a polarized plug. This plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not
change the plug in any way.
After you plug the power cord into the
outlet, turn the unit on by pushing the
switch from position "O" to position "l".
The symbols used on the switch actuator
are international "On & Off" symbols:
= OFF = ON
OPERATION
(continued)
Choosing the Correct Filter
There are a variety of Filters available for
WORKSHOP
® Wet/Dry Vacuums.
The Filters you choose should depend
upon the task you are performing.
Not all available Filters are included with
each model, but they may be purchased
from retailers carrying WORKSHOP
Wet/Dry Vacuums or from
www.WORKSHOPvacs.com.
The available Filters include:
1. Filter Bag
WARNING: To reduce the risk of
damage to the Vacuum, do not run
motor with float in raised position.
A Filter Bag or Cartridge Filter
should be used and positioned
correctly during all vacuuming
operations to avoid debris leaks and
possible damage to the vacuum
motor.
!
a. The available Filter Bag is catalog
number WS01025F.
b. The Filter Bag is intended for
cleaning up dry debris ONLY.
c. Removal of the Filter Bag is highly
recommended for wet pick-ups.
If debris being picked up has any
moisture, the bag will absorb the
moisture, making the bag non-
functional.
d. If using this vacuum for fine dust
pick-up such as spackling or flour, it
it not recommended to use the
provided Filter Bag. To pick-up very
fine dust, it is recommended to use
the Half-Height Fine Dust Pleated
Paper Cartridge Filter, catalog
number WS12045F.
e. See “Filter Removal and Installation”
section for directions on how to
change the Filter Bag.
a. The available Half Height Pleated
Paper Cartridge Filters include
catalog numbers WS11045F
(Standard) and WS12045F (Fine
Dust).
b. Each of these Pleated Paper
Cartridge Filters is intended for
cleaning up dry debris, however, a
small amount of liquid can be picked
up without damaging the Filter. When
maintained properly, small amounts
of liquid will not cause damage to the
Filter. When picking up larger
amounts of liquid, the Pleated Paper
Cartridge Filter will become
saturated, misting may appear in the
vacuum’s exhaust, and the Filter may
be damaged. After using the Vac to
pick up small amounts of liquid, the
Pleated Paper Cartridge Filter must
be dried to avoid mildew and
damage.
c. If you are using your vacuum to pick
up very fine dust, it will be necessary
for you to empty the drum and clean
the Filter at more frequent intervals
to maintain peak vacuum
performance.
d. See “Filter Removal and Installation”
section for directions on how to
change the Pleated Paper Cartridge
Filter.
2. Half-Height Pleated Paper Cartridge
Filters
SP6881-1 Workshop:SP6439-3_ES.qxd 8/26/13 11:25 AM Page 8