4 of 12
Workrite Ergonomics | (800) 959–9675 www.workriteergo.com
2
Assemble Rear Floating Bracket - Shorter or Equal Side
Assemble Rear Brackets (B) to Connector Bracket (R )
with two #M6 × 12 mm Flat Head Cap Screws (X).
Use this guide to determine the correct holes for
mounting based on the width of your Worksurface.
Tighten securely.
43.75"
40"
37.75"
34.75"
21"
43.75"
40"
37.75"
34.75"
21"
To avoid stripping the threads, always
insert and make the first few turns
of the screw BY HAND with an Allen
wrench (J), ensuring it is in straight.
C
C
C
B
B
B
B
Use with 70"× 23",
70"×29" or
64"×23" widths
Use with 64"× 29"
or 58"×23" widths
Use with 58"×29" widths
X
X
X
J
Use with 42"– 48" widths
Floating Side,
Right Configuration
Floating Side,
Left Configuration
When shown upside down, right will be on your left and vice-versa. Your frameset may differ.
Note: Brackets can be sized
in 3" increments for any
non-Workrite top.
Note!
Only use the #M6 × 12 mm Flat
Head Cap Screw (X) for assembly.
X
#M6 × 12 mm Flat Head
Cap Screw
Hardware at actual size
