9 of 9 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
1500469 Rev D
Cleaning Instructions
To clean the Sentinel legs, apply cleaner to a soft cloth.
Suggested cleaners: Windex or Formula 409.
Do not use solvents and do not saturate or spray cleaners directly onto work center base.
Parts & Accessories
Visit
for
replacement parts.
SENTINEL "BT" BLUETOOTH SMART APP SWITCH
Step
User input
1.
Disconnect the Table System from 120 V power by removing the power cord plug from the power supply
Note: If your Sentinel Base has more than one power supply, all power cords must be removed in this step
2.
Press and hold the
UP
and DOWN buttons
3. While holding the
UP
and DOWN buttons, reconnect the 120 V power cord to the power supply
Note: If your Sentinel Base has more than one power supply, all power cords must be reconnected in this step
4.
UP
and DOWN buttons
5.
Press the DOWN button until the table moves and stops. The "Restore Factory Settings" step is now complete
Down
Button
Up
Button
LED indicator light
•
Green: Available
•
Red: Occupied
SENTINEL "PS" PROGRAMMABLE SWITCH
Step
User input
1.
Press the "1" "2" and UP
button simultaneously for 10 seconds until "S–" appears
2.
Press the
UP
button two times until "S–0" appears
3. Press the "Save" button
4.
Press the DOWN button until the table moves and stops. The "Restore Factory Settings" step is now complete
Up
Down
Memory 1 Button
Memory 2 Button
Digital Readout
Save
Button
User
Button
29.00
FACTORY RESET
SENTINEL "PB" PROGRAMMABLE SWITCH
