Workrite Ergonomics | 800.959.9675 www.workriteergo.com
5 of 9
1.00
Place a foot (H) onto each leg as shown. Install two (2) M8 × 1.25P × 20 mm
flat head Allen screws (J) into each foot and tighten securely with the 5 mm
Allen wrench (P).
Choose the switch location for either right or left hand installation.
Note: Right is on the left when table is upside down.
Place the switch (B) as shown and drill ½" deep pilot holes with
a
3
⁄
32
" drill bit.
Install two (2) glides (Q) into each foot as shown.
Measure and mark the switch location with a pencil on the top
using the dimensions shown.
Install two (2) #8 × ⅝" Phillips screws (K) and tighten securely.
ATTACH FEET
ATTACH SWITCH
3.1
4.1
3.2
4.2
4.4
4.3
3
4
4.3
3.1
3.2
4.2
4.4
K
#8 × ⅝" Pan Head
Screw
Q
Q
Q
Q
Hardware at actual size
J
M8 × 1.25P × 20 mm Flat Head
Allen Screw
J
J
J
P
H
H
B
K
