Assembly
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
6
Step 1: Inserting levelers/casters.
Tools needed:
3/4” Wrench and
Socket
3/4” Wrench and
Socket
Parts needed:
4 x Levelers/Casters
Base
1. Install the leveling nut onto the leveling bolt until
it’s 1” from the bolt head. When installing the levelers
ensure that they are all the same height. Use a 3/4”
wrench on the head of the bolt and a 3/4” wrench on
the nut to tighten. Repeat this process for each leg on
the press
2. To install the caster system thread the top of the
bolt into the bottom of the press, where the levelers
would be installed. Thread until the very bottom.
3. After the casters are threaded by hand, use a 3/4”
deep socket wrench to tighten.
