Safety Procedures
WARNING
RISK OF ELECTRICAL SHOCK! Turn ALL power to unit OFF before service
.
All service should be done by, or under the supervision of a trained technician.
SAFETY FIRST:
Safety is essential to properly utilize the Cutlass.
The equipment is made of heavy moving parts and
if the safety precautions are not observed, serious
injury could occur.
DO NOT operate this equipment without functional safety cables in place.
DO NOT allow anybody who has not been trained in the safe operation of the machine near the machine.
DO NOT allow children near the equipment at any time.
DO NOT leave the equipment unattended while operating.
DO NOT operate the equipment without vocal warning. For example, “CLEAR” or “READY”.
DO NOT operate without visual inspection to ensure there are no personnel within the operational area
of the equipment.
ALWAYS disconnect the power source when servicing or entering the machine.
THIS PRODUCT IS INTENDED FOR INDOOR USE ONLY
1. MAIN AIR LOCKOUT VALVE:
A lockout valve located before the main
filter regulator has been provided as an added safety precaution. The
valve allows for a padlock to be installed, preventing air from being sup-
plied to the equipment.
2. SAFETY CABLE:
The safety cables are yellow cables that route around
the perimeter of the equipment. If disconnected the main control’s
power will be interrupted and air will be emptied from the machine by
the main dump valve.
DURING AN EMERGENCY SITUATION:
Push the emergency stop button or
disconnect the safety cables.
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
6
Safety Procedure
