NEO A Series, Anti-clip system (Explanation)
The
anti-clip system. If the 1V nominal input level is exceeded,
the anti-clip circuit will operate, attenuating the signal to prevent a clipped signal which
could cause the amplifier to distort. Low distortion electronic circuitry is used to maintain
the clarity of the input signal.
There are no user controls for the anti-clip circuit. If the level cannot be heard to increase
when the input level is increased, then the anti-clip circuit is operating, and the input level
or the VOLUME control should be decreased. Note that protection is not provided for
excessively high input levels (above 4V).
NEO A series features an
8
User Manual/Manual de Uso NEO Series
The NEO Series is rated to IP54 which means there is
ingress
protection.
The NEO Series is designed for both indoor and outdoor operation where it is protected
from direct exposure to water (e.g. under a canopy). The use of protection from water and
humidity for the connection terminals is highly recommended (e.g. sealant/mastic).
limited dust and water
IP54 weather proof rating
4
5
2
3
1
1
Rear wall mounting part
Threaded Ball
M10 nut
Rear threaded insert
(a)
(a)
Mounted to loudspeaker
2
3
4
5
6
7
Allen Screw 45 mm x M6
M6 nut
6
7
Metallic
Wall-mount bracket
(b)
Safety cable not included
Screw eyelet for safety cable
(a) (b)
EN
