Use the wall mounting part (1) to mark the fixing points
on the wall. Take into account the dimensions between
holes and the diameters marked in figure 1.
Drill wall and insert wall fixings. Screw wall mounting
part to wall.
Ensure that suitable screws and wall fixings are used.
If in any doubt contact a suitably qualified expert.
52 mm
35 mm
5 mm
Ø
95 mm
Unscrew the M6 Allen screw (2) to release the
threaded ball (4).
Mount (4) & (5) as shown in figure 3. Screw the threaded ball (4) into the threaded insert on
the rear of the loudspeaker (6) (loudspeaker not shown below).
Tighten M10 nut (5) against the loudspeaker with a spanner.
The assembly will now be as shown in figure 4.
Insert the complete assembly into the wall mounting
part, screw the Allen screw (2) several turns (do not
tighten completely). Now adjust the loudspeaker to
the desired position. Hold the speaker in position and
tighten the screw completely.
figure 1
figure 2
figure 3
figure 4
figure 5
9
User Manual/Manual de Uso NEO Series
WARNING: The maximum loading of this
bracket (10 kg), must never be
exceeded.
No other items must be
suspended or attached to the
bracket or speaker enclosure.
EN
