Work Pro LightMouse LM-5, Руководство пользователя

Страница: 29 / 64

/dmx/set/ch/ channel ,f: Put a channel to a particular level.
Where:
channel: channel to be accessed.
Parameters:
Float: d to 255 with the value of the channel.
The entered command indicates a particular value multifader, specifically this mulltifader controls
the Master.
This is because after the / dmx / set / ch / we added a -1 indicating the control channel will
be -1, in this case we are monitoring the Master due to the -1 is reserved for him. If instead
of -1 to 1 we would DMX controlling channel 1, and if we put 24, we would controlling the DMX
channel number 24.
As a DMX channel can have a value between 0 and 255 inValue Range section we assign the
minimum and maximum value that will have the Fader or Rotary that controls the Master.
Need not always be at least 0 and maximum 255, we give the minimum and maximum values
that interests us, avoiding thus able to lower or raise the intensity of a channel of certain values.
The specific command used is:
Configuring a Fader or Rotary:
27 User Manual