5.1 INTERF. MODE
RS232
6.- SECURITY
PUSH TO ENTER
6.- SECURITY
PASS: 000
5.1 INTERF. MODE
RS485
5.1 INTERF. MODE
DMX - 001
With
RS232
,
DCA 1
accepts ASCII control commands from an external command console. See the control commands
compatible with
DCA 1
in the
ANNEX I
.
With
RS485
,
DCA 1
accepts control commands from an external command console. See the control commands
compatible with
DCA 1
in the
ANNEX I
. The control commands are the same as RS232 but with different interface.
DCA 1
needs four DMX channels for control purpose. In the display it is possible to select the first control channel
(between 001 to 509).
The channel occupation is as follows:
Channel 1
: It control the OUTPUT 1 gain control ( in percentage from 0 to 100%)
Channel 2
:
It control the OUTPUT 2 gain control ( in percentage from 0 to 100%)
Channel 3
: It allows to select the audio source in OUTPUT 1 with these values:
From 0 to 49: None From 50 to 74: Input 1 From 75 to 100: Input 2 From 101 to 124: Input 3
From 125 to 149: Input 4 From 150 to 174: Input 5 From 175 to 199: Input 6 From 200 to 224: Input 7
From 225 to 255: Input 8
Channel 4
: Same function and behaviour as Channel 3 but applied to OUTPUT 2
6. SECURITY
Push the encoder to create a password to avoid unwanted manipulations in the device.
Move the encoder and push to select each value until to create a password with 3 digits.
NOTE: Please, retain the password, it is not resetable
Turn the encoder clockwise to pass to next sub-menu
7
User Manual/Manual de Uso DCA 1
EN
