5
User Manual/Manual de Uso DCA 1
EN
2.1-PRIORITY ON
STATUS: NO
2.2-PRIORITY TH
VALUE: 090
2.3-PRIORITY VOL
VALUE: 100
3.- ADD INPUTS
0_1:1 0_2:5
On this condition, the priority function is not activated and the PRIOR LED is off. Push the encoder to change
NO
by
YES
in order to activate the Priority fuction.
Turn the encoder clockwise to pass to next sub-menu
Turn the encoder clockwise to pass to next sub-menu
Turn the encoder clockwise to return to main menus system
Now it is possible to change the threshold value of priority condition. This value is expressed as percentage
3. ADDING INPUTS
DCA 1 allows to select one or several input sources and to drive them to OUTPUT 1 or OUTPUT 2. When we select several
inputs to one output, the device works as stack mode, mixing all of them.
On this example, the input source 1 has been assigned to Output 1 and input source 5 to Output 2. If you want to add more
inputs, repeat the previous step. For example adding the input source number 2 to OUTPUT 1.
Push the encoder, the symbol
:
beside
0_1:
will blink indicating the possibility to add input sources in OUTPUT 1.
Turn the encoder clockwise to increase or counter-clockwise to reduce the input number (from 1 to 8). when reach the
correct value, push the encoder, the symbol
:
beside
0_2:
will blink to change this value. After to confirm this second
value, turn the encoder to pass to next menu.
Now, it is possible to adjust the priority volumen rotating the encoder clockwise or counter-clockwise in order to increase or
reduce the value.
