Worcraft CMX-S20LIB, Инструкция по эксплуатации

Страница: 43 / 53

keep it pressed.
♦ Press down the switch trigger (11) and hold it. The tool will
keep running.
♦ To switch off the tool, just release the switch trigger (11). Electronic speed adjustment (Fig 8)
This tool equipped with a electronic speed adjustment
features, to turn the adjustment wheel (14) forward or
backward to adjust the speed as you wish.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come
off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
The machine requires no additional lubrication. If a fault occur, e.g. after wear of a part, please contact your local dealer
’s service.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the packaging
materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted machines to your
local dealer. Here they will be disposed of in an environmentally safe way.
Li-ion batteries can be recycled. Deliver them to a disposal site for chemical waste so that they can be recycled or
disposed of in an environmentally friendly manner.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection
centres (if available).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity with the following standards or standardized
documents: EN62841-1:2015+AC:15; EN62841-2-10:2017; EN55014-1:2017+A11:2020; EN55014-2:2015; in accordance with
the regulations 200
6/42/ЕС, 2014/30/ЕU.
NOISE/VIBRATION Measured in accordance with EN62841 the sound pressure level of this tool is 75dB(A) and the sound
power level is 86dB(A) (standard deviation:3dB), and the vibration is 4,55 m/s
2
.