CORDLESS CIRCULAR SAW
IN
INTENDED USE
This cordless circular saw (hereinafter "appliance") is designed for longitudinal, cross and mitre cuts in firmly supported solid
wood, chipboard, plastics and lightweight construction materials. Any other uses of or modifications to the machine are deemed
to be improper usage and may result in serious physical injury. Not for commercial use.
TECHNICAL SPECIFICATIONS
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Read the manual.
Wear ear protection.
Wear eye protection
Wear breathing protection
Electrical appliances must not be
disposed of with the domestic waste.
Protection class II
PRODUCT ELEMENTS
1
Safety lock-out
2
ON/OFF switch
3
Cutting depth scale
4
Release button for battery pack
5
Battery charge level button/battery display LED
6
Battery pack
7
Locking screw
8
Spindle lock
9
Base plate
10
Rip fence slot
12
Auxiliary handle
15
Cutting angle scale
16
Wing screw for cutting angle pre-selector
17
Wing screw for rip fence slot
18
Rip fence
19
Blade guard
20
Clamping flange
21
Clamping screw
22
Release lever for the blade guard
23
Saw blade
24
Chip ejector
26
Hex key
SAFETY
