EN
- Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) Service
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
- Always arrange for the exchange of the plug or the power cord to be carried out by the manufacturer of
the appliance or by its approved customer services. This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR COMPRESSOR:
- This appliance may not be used by children or people with reduced physical, sensory or mental capabilities
or a lack of experience and knowledge. Children must not use the appliance as a plaything.
Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
- Avoid using the compressor at temperatures below +5 degrees.
- Never leave the compressor unsupervised while it is in use.
- Ensure that the ON/OFF switch is turned off when connecting to the mains power supply.
- Caution! Operate the compressor only for a short time. The appliance may overheat if operated
continuously for longer than 10 minutes. Switch the appliance off immediately and allow it to cool down for
at least 10 minutes.
- Risk of injury! Do not pump any objects up to more than the intended pressure. They could burst and cause
injury and/or material damage.
- Do not exceed the permissible output range of the compressor. Do not pump up any lorry, tractor or other
large tires.
- Do not work with any materials that are or could be easily inflammable or explosive.
- Never use the appliance for purposes other than the ones for which it was designed.
- The appliance must always be kept clean, dry and free from oil or grease.
- Never use gasoline or other inflammable liquids to clean the unit! Vapours remaining in the appliance could
be ignited by sparks and lead to the explosion of the appliance!
- Remain alert at all times! Never use the appliance when you are distracted or don’t feel well.
SAFETY ADVICE FOR WORKING WITH COMPRESSED AIR AND BLOW-GUN:
-
RISK OF ELECTRIC SHOCK!
Do not operate the appliance with a damaged power cord or mains plug.
-
RISK OF ELECTRIC SHOCK!
Never touch the power cord during operation if it is damaged or cut. Pull out the
plug immediately and then have the appliance repaired by a specialist or the responsible service centre.
-
RISK OF ELECTRIC SHOCK!
Never operate the appliance if it is damp or in a humid environment.
-
RISK OF ELECTRIC SHOCK!
When working outdoors, connect the appliance via a fault current circuit breaker
with a maximum tripping current of 30 mA. Use only an extension cord approved for outdoor use.
