Worcraft PROFESSIONAL GC22-16E, Инструкция по эксплуатации

Страница: 72 / 74

• Make the first cut (Item 1) 1/3 in the bottom of the limb.
• Then cut the second section (Item 2) all the way through the
branch. The third section (item 3) is a general section that
allows you to separate the branch at 2.5 to 5 cm from the trunk.
Sawing on a slope (Fig. K)
When sawing on a slope, make sure you always stand higher
than the tree trunk (Fig. K). In order to maintain complete control
at the moment of “sawing through”, reduce pressure towards the
end of the cut without releasing your tight grip on the
handles of the chainsaw.
Warning!: The saw chain must not come in contact with
the ground..
After completing the cut, wait for the saw chain to come to
a standstill before removing the chainsaw. Always turn off
the chains
aw’s motor when going from one tree to the
next.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off
use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
The machine requires no additional lubrication.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the packaging
materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted
machines to your local dealer. Here they will be disposed of in an environmentally safe way.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection
centres (if available).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents:
EN60745-1:2009+A11; EN60745-2-13:2009+A11;EN55014-1:2006+A1+A2;EN55014-2:2015; EN61000-3-2:2014;EN61000-3-
11:2000; in accordance
with the regulations 2006/42/ЕEС, 2014/30/ЕEС.
NOISE/VIBRATION Measured in accordance with EN60745 the sound pressure level of this tool is <89.4 dB(A) and the sound
power level is <100.4dB(A) .